Last updated at November 5, 2026 by Teachoo
Transcript
Ex 12.1, 5 Can a quadrilateral be both self-intersecting and non-planar? No. A quadrilateral cannot be both self-intersecting and non-planar. Here is the big secret If two straight sticks touch each other, they are trapped on one flat surface You can either have a flat shape where the sides cross (like a bow-tie on paper), or a 3D bent shape where the sides fly past each other like an overpass and underpass. You can never have both at the same time Let’s visualise it In a flat surface, they touch Flat Paper Surface ec @ | t P (TOUCHING!) B e @ @A @c iP (TOUCHING!) e eA t P (TOUCHING!) In a 3D bent shape, they don’t touch Flat Paper Surface @ D (Lifted Up!) @A Bridge Gap: 1 cm Colo @g@ PD iverpass Gap!) @D (Lifted Up!) idge Gap: 10.0 cm Thus, A self intersecting quadrilateral must be planar Comparing the Two Pictures Side-by-Side Look at how touching vs not-touching changes the whole shape CASE A: FLAT & TOUCHING (CROSSED) Touches at point P. All 4 corners stay flat on the table. CASE B: 3D SKEW (CORNER D LIFTED UP) : Height Gap > 0 Does not touch! Corner Dis lifted. One line flies over the other. Analogy 1: The Flat Sheet of Paper Analogy 2: The Highway Bridge & Overpass Planar & Self-Intersecting Non-Planar (Skew 3D) Draw a bow-tie on your math notebook. Two lines cross at an Think of a highway where a bridge passes overanother road. exact pencil dot P. If you look down from an airplane, the roads look like an "X". Why is it planar? Do the cars crash? Because the two lines touch at point P, both lines lie completely No! The top roadis 20 feet up in the air. They don't touch at all! In flat on the page. All four corners (A, B, C, D) are stuck to that single 3D geometry, lines that don't touch and aren't parallel are called sheet of paper. It is 1OO% planar! skew lines. That's why 3D quadrilaterals never self-intersect!